Supacat launches Light Reconnaissance Vehicle 400 at DSEi 2013

Supacat is launching the Light Reconnaissance Vehicle 400 (LRV 400) at DSEi 2013 as a low cost, high performance capability for special forces, border patrol, reconnaissance, rapid intervention and light strike roles. Offering light forces supreme levels of all-terrain mobility, the LRV 400 is able to be tactically loaded within a CH-47 Chinook with its full operational payload on board.

The LRV 400 is a militarized variant of Qt Services’ successful `Wildcat` off-road motorsport vehicle, which has a proven record on the Rally Raid circuit and has earned a reputation for rugged reliability and high speeds over rough terrain.

Using a fresh approach, Supacat have teamed with Qt to modify and integrate the COTS vehicle to military standards, thus providing an affordable capability using proven technology. The LRV 400 fills the gap in Supacat’s product portfolio between the heavier `Jackal` surveillance, reconnaissance and patrol vehicle and the smaller All-Terrain Mobility Platform (ATMP).

“The LRV 400 meets the gap in the military market for a light reconnaissance vehicle with an overall capability as close to that of Jackal as possible, but smaller and at less cost by adopting a COTS approach. We’ve taken motorsports’ best of breed in Qt’s Wildcat and modified it to military specification using Supacat’s proven expertise in developing Jackal,” said Jamie Clarke, Head of Marketing & Communications, Supacat. “Supreme performance and tactical CH-47 internal loading have been key targets on this project. The users will be able to drive in and drive out without the need to offload their payload or to conduct any lengthy preparation for flight. When they get there, they will be afforded the very best terrain access and operational capability. Applying motorsport technology to Defence applications is an exciting approach and one that will deliver unrivalled performance”.

The LRV 400 has evolved out of customer feedback on a proof-of-concept closed cab demonstrator developed by Supacat and Qt in 2011. Wildcat’s tubular space-frame chassis and state of the art suspension are critical to the LRV’s performance and rugged reliability. The display vehicle at DSEi is shown in a three crew configuration of commander, driver and gunner but the flexibility of the space-frame design allows the LRV 400 to be easily re-configured to meet different operational roles.

With a Gross Vehicle Weight of 3500kg, a width of 1.8m and a height of 1.8m (weapon removed or lowered) the LRV 400 is easily air portable in a CH-47 Chinook helicopter. It boasts a maximum speed of 106 mph (170km/h) and a range of 1000km. Payload is up to 1400 kg, depending on customer specification and configuration. It can be fitted with a range of powertrain options – the display vehicle has a Ford 3.2-litre, 5-cylinder diesel engine developing 236 hp and 550 Nm torque coupled to a Ford-supplied 6-speed automatic gearbox and two-speed transfer box however, other engine and transmission options are available.

Click here to visit the LRV 400 product page

Supacat Multi-purpose Vessel 24 unveiled to defence and security market

Supacat is unveiling the Supacat Multi-purpose Vessel 24 (SMV24) to the defence and security market at DSEi. Launched to the wider marine and renewable energy sectors in July, the SMV24 is a new concept in support vessel design, which also has the potential to perform a range of defence and security related roles. Its flexibility, high speed and high payload have already attracted interest from potential operators in the sector.

The SMV24 is a fine entry catamaran that can achieve speeds up to 30 knots and has a range up to 790nm. In the present configuration, the 24 metre vessel can carry up to 12 additional passengers and up to 30 tonnes of cargo simultaneously. However, the flexibility of the design allows for adaptation to meet alternative and emerging roles.

The first SMV24 is under construction and will be completed later this year. It was developed by Supacat to support the new generation of far offshore wind farms which require it to operate up to 150 nm from a safe haven.

“Since launching the SMV24 into the marine and renewable energy markets it has generated interest from military users for a number of different roles, hence our decision to exhibit it at DSEi. Supacat has a strong brand in defence, which differentiates our offering in this segment of the market”, said Jamie Clarke, Head of Marketing & Communications.

Supacat has built a global reputation as the developer of high mobility vehicles, such its HMT series – the vehicle of choice for elite special forces and best known as `Jackal` and `Coyote` in service with British Armed Forces. Over the last decade the company has successfully applied the company’s innovation and engineering skills to develop products in the adjacent marine and renewables sectors for customers, including the RNLI and Fred Olsen.

The SMV24’s multi-role performance is based on a revolutionary deck system boasting a through-deck and an integrated rail system running the length of the vessel. This allows a range of equipment for different roles to be installed, such as ISO containers, a deck crane or diving rig. The deck can carry up to 50ft of ISO containers in a variety of 20ft and 10ft sizes.

For the SMV24 project Supacat selected a team with strong pedigrees in the marine sector. Naval architects Incat Crowther translated Supacat’s SMV 24 concept into a detailed design and established boat builder, Mustang Marine (Wales) Ltd, is building the first vessel. DNV advised on classification. The SMV24 will meet DNV 1A1 HSLC R1 Windfarm Service Vessel Class 1 and be UK MCA SCV Code (MGN280) Category 1.

The ISO compatibility of the through deck allows the SMV24 to perform multiple roles including infrastructure support, diving, survey, fuel transport, workshop, refrigeration, general cargo, passenger transport, Remotely Operated Vehicle support by using ISO compatible modular custom loads. The rapid loading of these alternative ISO modules extend the functionality of the SMV 24 further. Interestingly, the inspiration for this functionality came from defence where Supacat has witnessed such modularity in use for military logistic operations.

The SMV24 is a catamaran based design constructed from marine grade aluminium with double bottom to ensure maximum survivability. Two MAN D2862 LE463 engines each coupled to a Servogear Controllable Pitch Propeller give greater control of thrust throughout the rev range and maximise fuel economy. Significant redundancy has been built into the electrical system to fulfil specific customer requirements and the two generators fitted are capable of powering all the vessel systems individually.

At DSEi a 1:25 scale model of the SMV24 can be viewed on Supacat’s stand.

 

Hide

This website will store cookies on your computer. We use cookies to improve your browsing experience (we never store personal information in a cookie) and to track how the site is being used. By continuing to browse the site you are agreeing to our use of cookies.